Motors & Drives

L-BR00-E-161

COMPONENTS COMPONENT S COMPONENT S

Multi Axis Servo Drive DM2020 Multi Axis Servo Drive DM2020 ulti Axis Servo Drive D 2020 Multi Axis Servo Drive DM2020 Multi Axis Servo Drive DM2020

3 The asynchronous and permanent magnet units are available in versions with 2, 4, 6 and 8 poles and more, with an external diameter from 52 to 300mm and speed of rotation up to 260000rpm. rotor/stator high frequency units are designed to be integrated in the otor spindles for illing, grinding, drillin , in pu ps, f ns, co pressors, centrifuges etc. both for clas ical spin le anufacturers and industrial achinery anufacturers, each according to their specific perfor ance require ents. The asynchronous and per anent agnet units are available in versions with 2, 4, 6 and 8 poles and more, with an external diameter from 52 to 300 and speed of rotation up to 260000rpm. rp The HF rotor/stator high frequency units are designed to be integrated in the motor spindles for milling, grinding, drilling, in pumps, fans, c m ressors, cen rifuges etc. both for classical spindle manufacturers and industrial mach nery manufacturers, each cording their specific performance require ents. The asynchronous and permanent magnet units are available in versions with 2, 4, 6 and 8 poles and more, with an external diamete from 52 to 300mm and speed of rotati n up to 260000rpm. The F otor/stat r high frequency units are designed to be integrated in the motor spindles for milling, grinding, drilling, in pumps, fans, compressors, centrifuges etc. bot for classical spindl manufacturers and in ustrial achinery manu acturers, each accord ng to their specific performance r quirem nts. The asynchronous nd p manent m gnet u its are available in versions with 2, 4, 6 and 8 pole and more, with an external diameter from 52 to 300mm and speed of rotation up to 260000 pm. Decentralized Servo Drive DR2020 The DR2020 is a drive suitable for applications with electronics distributed on the machine, that can be integrated intoamulti-axisconfiguration.Thanks tothe IP67protectiongrade, theDR2020doesnot require an electrical cabinet to be installed, but can be positioned directly on the machinery with a consequent streamlining of wire configurations and space savings in the control cabinets. This also thanks to the use of a single connector for power and signal. Brushless Motor with Natural or Liquid Cooling Fastact H The servomotorMoog Fastact seriesH (W) is a synchronousmotor with permanentmagnets characterized by compactness, high overload capacity and high accelerations. It is available in a wide range of sizes, with nominal torques from0.3 Nm to 831 Nm and peak torques from1.8 Nm to 1721 Nm, with natural (Fastact H) or liquid cooling (Fastact WH). Direct Drive Motor D1200 The servomotors direct drive Moog D1200 series are synchronous motors with permanent magnets characterized by high torque and low speed. The motors are available in both complete version and as a rotor stator unit for integration into the mechanics of the customer. There is a wide range of modularity from 2000 Nm up to 16000 Nm, with natural cooling and water cooling. HF High Frequency Rotor Stator Units The HF rotor/stator high frequency units are designed to be integrated in the motor spindles for milling, grinding, drilling, in pumps, fans, compressors, centrifuges etc. both for classical spindle manufacturers and industrial machinery manufacturers, each according to their specific performance requirements. The asynchronous and permanent magnet units are available in versions with 2, 4, 6 and 8 poles andmore, with an external diameter from 52 to 300 mm and speed of rotation up to 260000 rpm. suitable for applications with electronics distributed on the machine, that can be integrated into a multi-axis configuration. Thanks to the IP67 protection grade, the DR2020 does not require an electrical cabinet to be installed, but can be positioned directly on the machinery with a consequent streamlining of wire configurations and space savings in the control cabinets. This also thanks to the use of a single connector for power and signal. Brushless motor with natural or liquid cooling Fastact H The servomotor Moog Fastact ser es H (W) is a synchronous motor with permanent magnets characterized by compactness, high overload capacity and high accelerations. It is available in a wide range of sizes, with nominal torques from 0.3 Nm to 831 Nm and peak torques from 1.8 Nm to 1721 Nm, with natural (Fastact H) or liquid cooling (Fastact WH). Direct drive motor D1200 The servomotors direct drive Moog D1200 series are synchronous motors with permanent magnets characterized by high torque and low speed. The motors are availabl in bot complete version and as a rotor stator un t f r integration into the mechanics of the cust mer. Ther is a wide range f modularity from 2000Nm up to 16000Nm, with natural cooling and water cooling. HF High frequency rotor stator units The HF rotor/stator high frequency units are designed to be integrated in the motor spindles for milling, grinding, drilling, in pumps, fans, compressors, centrifuges etc. both for classical spindle manufacturers and industrial machinery manufacturers, each according to their specific performance requirements. The asy ronous and permanent magnet units re available in versions with 2, 4, 6 and 8 poles and ore, with an external diameter from 52 to 300mm and speed of rotation up to 260000rpm. The DR2020 is a drive suitable for applications with electronics distributed on the machine, that can be integrated into a multi-axis configuration. Thanks to the IP67 protection grade, the DR2020 does not require an electrical cabinet to be installed, but can be positioned directly on the ma hinery with a conseque t streamlining of wire configurations and space savings in the control cabinets. This also thanks to the use of a single connector for power and signal. Brushless motor with natural or liquid cooling Fastact H The servomotor Moog Fastact series H (W) is a synchronous motor with permanent magnets characterized by compactness, high overload capacity and high accelerations. It is vailable in a wide range of sizes, with ominal torques fr 0.3 Nm to 831 Nm and peak torques f om 1.8 Nm to 1721 Nm, wit tural (Fastact H) r liquid cooling (Fastact WH). Direct drive motor D1200 The servomotors direct drive Moog D1200 series are synchronous motors with permanent magnets characterized by high torque and low speed. The motors are available in both complete version and as a rotor stator unit for integration into the mechanics of the customer. There is a wide range of modularity from 2000Nm up to 16000Nm, with natural cooling and water cooling. HF Hig fr ency rotor stator units The HF rotor/stator high frequency units are designed to be integrated in the motor spindles for milling, grinding, drilling, in pumps, fans, compressors, centrifuges etc. both for classical spindle manufacturers and industrial machinery manufacturers, each according to their specific performance requirements. The DR2020 is a drive suitable for applications with electronics distributed on the achine, that can be integrated into a ulti-axis configuration. Thanks to the IP67 protection grade, the 2020 does not require an electrical cabinet to be installed, but can be positioned directly on the achinery with a consequent strea lining of ire configurations and space savings in the control cabinets. This also thanks to the use of a single connector for power and signal. Brushless otor ith natural or liquid cooling Fastact H The servo otor oog Fastact series H ( ) is a synchronous otor with per anent magnets characterized by compactness, high overload capacity and high accelerations. It is available in a wide range of sizes, with nominal torques from 0.3 Nm to 831 Nm and peak torques from 1.8 Nm to 1721 Nm, with natural (Fastact H) or liquid cooling (Fastact ). irect drive otor D1200 The servo otors direct drive oog 1200 series are synchronous otors with permanent agnets characterized by high torque and low speed. The motors are available in both co plete version and as a rotor stator unit for integration into the echanics of the custo er. There is a wide range of odularity fro 2000N up to 16000N , with natural cooling and ater cooling. F igh frequency rotor stator units The s h ra oad H) n a e ue d . c o g Brushless motor with natural or liquid cooling Fastact H The servomotor Moog Fastact series H (W) is a synchronous motor with permanent magnets characterized by compactness, high overload capacity and high ccelerations. It is available in a wide r ng of sizes, with nominal torques from 0.3 Nm to 831 Nm and peak torques from 1.8 Nm to 1721 Nm, with nat ral (Fastact H) or liquid cooling (Fastact WH). Direct drive motor D1200 The servomotors direct drive Moog D1200 series are synchronous motors with permanent magnets characterized by high torque and low speed. The motors are available in both complete v rsion and as a rotor stator unit for int grati n into the mecha ics of the custom . There is wide range of modularity from 2000Nm up to 16000Nm, with natural cooling and water cooling. HF High frequency rotor stator units Brus less m tor with natural or liquid o ling Fastact H Direct drive motor D1200 Th servomotors direct drive Moog D1200 series are synchronous motors with permanent magnets characterized by high torqu and low speed. The motors are available in both complete rsi n and as a rotor stator unit f r integration in o the echanics of the customer. There is a wide range of modularity from 2000Nm up to 16000Nm, with natural cooli g and w ter cooling. HF High frequency rotor stator units Th DR2020 is a dri Multi-Axis Servo Drive DM2020 Compact and flexible, the DM2020 is a modular multi-axis drive with centralized power. It is equipped by fieldbus (EtherCAT®, CANBus) andmanages synchronous permanentmagnetmotors, linearmotors, torque motors and asynchronousmotors. The current sizes range from2 to 128 and up to 256Arms nominal peak. Compact and flexible, the DM2020 is a modular multi-axis drive with centralized power. It is equipped by fieldbus (EtherCAT, CAN bus) and manages synchronous permanent magnet motors, linear motors, torque motors and asynchronous motors. The current sizes range from 2 to 128 and up to 256 Arms nominal peak. Compact and flexible, the DM2020 is a modular multi-axis drive with centralized power. It is equipped by fieldbus (EtherCAT, CAN bus) and manages synchronous permanent magnet motors, linear motors, torque motors and asynchronous motors. The current sizes range from 2 to 128 and up to 256 Arms nominal peak. Co pact and flexible, the D 2020 is a odular ulti-axis drive with centralized power. I is equipped by fieldbus (EtherCAT, CA bus) and anages synchrono s per anen agnet otors, linear otors, torque motors and a y chronou motors. The current sizes range fro 2 to 128 and up to 256 Ar s no inal peak. Compact and flexible, the DM2020 is a modular multi-axis drive with centralized power. It is equipped by fieldbus (EtherCAT, CAN bus) nd manages synchronous er anent magn t motors, l near motors, torque motors nd a motors. The curren size range from 2 to 128 and p to 256 Arms n mi al peak. The DS2020 is the new digital "stand alone" servo drive, specifically designed with small overall dimensions. The current capacity f the available versions (50, 75, 85 and 125 mm) range from 2 Arms to 48 Arms continuous, and from 4 Arms to 96 Arms peak. Compact and flexible, the DM2020 is a modular multi-axis drive with centralized power. It is quipped by fieldbus (EtherCAT, CAN bus) and manages synchronous ermanent magnet motors, linear motors, torq e motors and asynch n us moto s. The current sizes range from 2 to 128 and up to 256 Arms nominal peak. Single Axis Servo Drive DS2020 The DS2020 is the n w digital "stand alone" servo drive, specifically designed with small overall dimensions. The current capacity of the available versions (50, 75, 85 and 125 mm) range from 2 Arms to 48 Arms continuous, and from 4 Arms to 96 Arms p ak. The DR2020 is a drive suitable for applications with electronics distributed on the machine, that can be integrated into a multi-axis configuration. Thanks to the IP67 protection grade, the DR2020 does not require an electr al cabine to be installed, but can be posi ioned irectly on he machinery with a con equent streamlining of wire configurations and pace savings in the control c nets. This al o thanks to th use of a s ngle connector for powe and signal. Single-Axis Servo Drive DS2020 TheDS2020 is the newdigital “standalone” servodrive, specificallydesignedwith small overall dimensions. The current capacity of the available versions (50, 75, 85 and 125 mm) range from 2 Arms to 48 Arms continuous, and from 4 Arms to 96 Arms peak. The DS2020 is the new digital "stand alone" servo drive, specifically designed with small overall dimensions. The current capacity of the available versions (50, 75, 85 and 125 mm) range from 2 Arms to 48 Arms continuous, and from 4 Arms to 96 Arms peak. The DS2020 is the new digital "stand alone" servo drive, specifically designed with small overall dimensions. The cur ent capacity of the available versions (50, 75, 85 and 125 mm) range from 2 Arms to 48 Arms continuous, and from 4 Arms to 96 Arms peak. The DS2020 is the new digital "stand alone" servo drive, specifically designed ith s all overall di ensions. The current capacity of the available versions (50, 75, 85 and 125 ) range fro 2 r s to 48 r s continuous, and fro 4 r s to 96 Ar s peak. The DR2020 is a drive suitable for applications with electronics distributed on the machine, that can be integrated into a multi-axis configurat on. Thanks to the IP67 protection grade, the DR2020 does not require a electr cal cabinet to b installed, but can be positioned directly on the machinery with a consequent stre mlining of wire configurations and space savings in th control cabinets. This also thanks to the use of a single connector for power a d signal. Decent alized Servo Drive DR2020 The s rvo t r Moog F stact series H (W) is a synchronous motor with permanent magnets characterized by compactness, high overload capacity and high accelera i ns. It is av ilable in a wide range of sizes, with nominal torques fro 0.3 Nm to 831 Nm and peak torques from 1.8 Nm to 1721 Nm, with natural (Fastact H) or liquid cooling (Fastact WH). Single Axis Servo Drive DS2020 Single Axis Servo Drive DS2020 Single Axis Servo Drive DS2020 Single Axis Servo Drive DS2020 Decentralized Servo Drive DR2020 Decentralized Servo Drive DR2020 ecentralized Servo rive DR2020 Decentralized Servo Drive DR2020