ICP_Operations_Guide_2016

Using the above example, where values of 1004, 1005, and 1001 were considered acceptable for the calculation of the mean and the experimental standard deviation the mean would be 1003, the experimental standard deviation would be 2 and the standard deviation of the mean would be 1.

15 Significant Figures

Significant Figures and Uncertainty

When working with analytical data it is important to be certain that you are using and reporting the correct number of significant figures. The number of significant figures is dependent upon the uncertainty of the measurement or process of establishing a given reported value. In a given number, the figures reported, i.e. significant figures, are those digits that are certain and the first uncertain digit. It is confusing to the reader to see data or values reported without the uncertainty reported with that value. Example A sample is measured using ICP-OES and reported to contain 0.00131 ppm of Fe. This value implies with certainty that the sample contains 0.0013 ppm Fe and that there is uncertainty in the last digit (the 1). However, we know how difficult it is to make trace measurements to 3 significant figures and may be more than a little suspicious. If the value is reported as 0.00131 ± 0.00006 ppm Fe this indicates that there was an estimation of the uncertainty. A statement of how the uncertainty was determined would add much more value to the data in allowing the user to make judgments as to the validity of the data reported with respect to the number of significant figures reported. Examples • You purchase a standard solution that is certified to contain 10,000 ± 3 ppm boron prepared by weight using a 5-place analytical balance. This number contains 5 significant figures. However, the atomic weight of boron is 10.811 ± 5. It is, therefore, difficult to believe the data reported in consideration of this fact alone. • The number 0.000013 ± .000002 contains two significant figures. The zeros to the left of the number are never significant. Scientific notation makes life easier for the reader and reporting the number as 1.3 x 10-5 ± 0.2 x 10-5 is preferred in some circles. • A number reported as 10,300 is considered to have five significant figures. Reporting it as 1.03 x 10 4 implies only three significant figures, meaning an uncertainty of ± 100. Reporting an uncertainty of 0.05 x 10 4 does not leave the impression that the uncertainty is ± 0.01 x 10 4 , i.e., ± 100. • A number reported as 10,300 ± 50 containing four significant figures. If the number is reported as 10,300 ± 53, the number of significant figures is still 4 and the number reported this way is acceptable, but the 3 in the 53 is not significant. Mathematical calculations require a good understanding of significant figures. In multiplication and division, the number with the least number of significant figures determines the number of significant figures in the result. With addition and subtraction, it is the least number of figures to the left or right of the decimal point that determines the number of significant figures. Examples • The number 1.4589 (five significant figures) is multiplied by 1.2 (two significant figures). The product, which is equal to 1.75068, would be reported as 1. 8 (two significant figures). • The number 1.4589 (five significant figures) is divided by 1.2 (two significant figures). The dividend, which is equal to 1.21575, would be reported as 1.2 (two significant figures). • The addition of 5.789 (four significant figures) to 105 (three significant figures) would be reported as 111. Uncertainty The International Vocabulary of Basic and General Terms in Metrology (VIM) defines uncertainty as: “A parameter associated with the result of a measurement, that characterizes the dispersion of the values that could reasonably be attributed to the measurand.”

* Visit inorganicventures.com/tech/icp-operations/ for additional information from this link

ICP_Booklet.indd 34

ICP_Booklet.indd 34

2/9/11 4:58 PM

2/9/11 4:58 PM

34